THE IMPLEMENTATION OF THE INNOVATIVE NUMERICAL SIMULATION SYSTEM (FEM) FOR THE INVESTIGATION IN THE VIBRO-ACOUSTIC (NVH) BEHAVIOR OF THE AUTOMOBILE PARTS
Abstract
The numerical simulation system for structural intensity analysis and visualization to apply for FEM-models has presented. The mathematical formulation of the Structural Intensity has introduced, the numerical simulation system has implemented in ANSYS program software, the visualization technique of the vector fields of energy flow has realized in HyperView software. The intensity vectors, streamline map and energy distribution in shell-elements plate under excitation force are calculated and visualized to predict mechanical energy transmission. The cases with different excitations (point force and pressure) and different damping parameters have been studied. Using the system, the analysis was carried out to visualize structural intensity fields on the global shell-elements structure and to investigate dominant energy flow paths from harmonic excitation sources. The structural intensity analysis together with visualization techniques provides a powerful tool for vibration and noise control.
About the Authors
A. G. Kitov
Нижегородский государственный педагогический университет имени Козьмы Минина
Russian Federation
Russian Federation
У. U. Vachidov
НГТУ им. Р.Е.Алексеева
Russian Federation
Russian Federation
V. A. Shapkin
НГТУ им. Р.Е.Алексеева
Russian Federation
Russian Federation
Y. Shapkina
НГТУ им. Р.Е.Алексеева
Russian Federation
Russian Federation
References
1. Stoewer, T. Efficiency improvements in the acoustical design of vehicle structures by means of energy flow calculation / T. Stoewer, H. Schneeweiß [BMW Group], T. Hering, Dr.-Ing. J. Bös , Prof. Dr.-Ing. H. Hanselka [TU Darmstadt] // AAC conference, 2011.
2. Hering ,T. Strukturintensitätsanalyseals Werkzeug der Maschinenakustik / T. Hering - TU Darmstadt, 2012.
3. Noiseux, D.U. Measurement of power flow in uniform beams and plates // Journal of Acoustical Society of America, 47, 238-247, (1970).
4. Pavic, G. Measurement of structure borne wave intensity - Part I: formulation of the methods // Journal of Sound and Vibration, 49(2), 221-230, (1976).
5. Gavric, L. and Pavic, G. A finite element method for computation of vibration intensity by the normal mode approach // Journal of Sound and Vibration, Vol. 164, No. 1, pp. 29-43 (1993).
6. Hambric, S. A. and Taylor, P. D. Comparison of experimental and finite element structure-borne flexural wave power measurements for straight beam // Journal of Sound and Vibration, Vol. 175, No. 5, pp. 595-605 (1994).
7. Kuhl, S. Gezielte Leitung von Körperschall unter Zuhilfenahme der Strukturintensitätsrechnung / S. Kuhl - TU Darmstadt, 2010
8. Шапкина, Ю.В. Влияние конструктивных параметров большегрузных автомобилей на характеристики управляемости / Ю.В. Шапкина, В.Б.Платонов // Проблемы транспортных и технологических комплексов: сборник научных статей III Международной научно-технической конференции посвященной 40-летию кафедры «Строительные и дорожные машины»; НГТУ. - Н. Новгород, 2012. - С.129-131
Review
Views:
500
Email this article 